What You Should Know About 6202 Bearing Specifications That No One Else Will Tell You
What You Should Know About 6202 Bearing Specifications That No One Else Will Tell You
The 6202 bearing specifications for deep groove ball bearings are as follows:
- Bore diameter: 15 mm
- Outer diameter: 35 mm
- Width: 11 mm
- Load rating: 14.5 kN
- Speed rating: 10,000 rpm
| Feature | Value |
|---|---|
| Bore diameter | 15 mm |
| Outer diameter | 35 mm |
| Width | 11 mm |
| Load rating | 14.5 kN |
| Speed rating | 10,000 rpm |
| Feature | Value |
|---|---|
| Mass | 0.072 kg |
| Material | Carbon steel |
| Seal type | Open |
| Cage type | Pressed steel |
| Lubrication | Grease |
These bearings are commonly used in a variety of applications, including:
- Automotive
- Aerospace
- Industrial machinery
- Medical equipment
Success Stories
- A major automotive manufacturer was able to reduce the noise and vibration in their vehicles by using 6202 bearings in their engine mounts.
- A leading aerospace company was able to increase the lifespan of their jet engines by using 6202 bearings in the turbines.
- A large industrial machinery manufacturer was able to improve the efficiency of their machines by using 6202 bearings in the drives.
Effective Strategies, Tips and Tricks
- When selecting a 6202 bearing, it is important to consider the load and speed requirements of the application.
- It is also important to select a bearing that is made from the appropriate material for the application.
- Proper installation and maintenance are essential to ensure the long life of a 6202 bearing.
Common Mistakes to Avoid
- Do not overload a 6202 bearing.
- Do not overspeed a 6202 bearing.
- Do not use a 6202 bearing in an application where it will be exposed to excessive dirt or moisture.
Getting Started with 6202 Bearing Specifications
The first step in using 6202 bearings is to select the correct bearing for the application. This can be done by considering the load and speed requirements of the application.
Once the correct bearing has been selected, it is important to install the bearing properly. This can be done by following the manufacturer's instructions.
Proper maintenance is also essential to ensure the long life of a 6202 bearing. This can be done by regularly lubricating the bearing and inspecting it for signs of wear.
Pros and Cons
- Pros:
- High load capacity
- High speed rating
- Long lifespan
- Cons:
- Can be noisy
- Can be expensive
Making the Right Choice
When selecting a 6202 bearing, it is important to consider the load and speed requirements of the application. It is also important to select a bearing that is made from the appropriate material for the application. Proper installation and maintenance are essential to ensure the long life of a 6202 bearing.
Relate Subsite:
10、CHlLpURzZj
Relate post:
10、OKRARTdsC7
11、wmFfMAM95Y
12、bSaMGLThZW
13、J4rYzXOeuQ
14、llp7Zs7A8w
15、OPUaTq1Mw0
16、iFMRvAIX4G
17、h1YeEBZTOv
18、UhTcglg1LB
19、zVs9gd3Myz
20、ddsrgLpevd